This coating dries to a crystal clear film with extremely good sanding properties specially formulated to bond to a wide range of surfaces.
• all timber surfaces • galvanised and primed metal • non-ferrous metals • glass • certain plastic • laminate
• hard and durable protection • bonds to a wide range of surfaces • glass clear gloss finish • fast drying • heat and water resistant • water wash up • easy to apply
All surfaces must be clean and free from dust, dirt, oil and contamination.
Timber: Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure the product is well mixed. Use a good quality synthetic brush and apply evenly using light brush strokes. Apply the first coat and allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.
Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the Lacquer can draw certain stains through the paint, which would not otherwise be visible.